Mac Onvif Device Manager

ONVIF Device Manager is a software that allows you to test IP cameras Download the ONVIF Device Manager at:The U. ONVIF Device manager A good program for viewing and controlling your cameras with very little setup needed. Just be sure to turn ONVIF on in your cameras IP interface.

Onvif Device Manager V2.2.250
Onvif Device Manager For Mac
Onvif Device Manager For Linux

ONVIF Device Manager is an open-source software application (currently available for Windows only), which scans your network for cameras, DVR's, and NVR's, trying to locatea stream address that can then be used for connecting your device to Angelcam.

Who should use this?

If you've already setup port-forwarding for your device, but Angelcam can't find a stream automatically and/or:

Your device documentation doesn't mention a RTSP or MJPEG stream path
Your camera supplier or manufacturer provides no support
You can't find any documentation or information on Google

Finding a stream path

Step 1: Be sure that you are on the same network as the device you're trying to discover (advanced users can also try to find a stream address for remotely accessible cameras as well, just use the 'Add' button and specify the public address and forwarded ONVIF port of the remote device)
Step 2: Download and install ONVIF Device Manager (Windows only)
Step 3: Click the 'Refresh' button to scan your network
Step 4: Select 'Live Video' from the menu

Step 5: Copy the stream address, shown under the live video, to your clipboard (be sure to replace your local IP address with the public one when connecting directly)
Note: if your camera is password protected, be sure to enter your credentials in the upper left corner.

Connecting a camera to Angelcam

a) With AngelBox

Step 1: Open AngelBox's Camera Connector, type in your AngelBox's ID, and let AngelBox detect your device
Step 2: Once found, click, 'I want to use a different camera stream channel'
Step 3: Paste the stream address from your clipboard and delete everything except the part after the port. For example if your camera stream has been discovered at 'rtsp://admin:1234@192.168.1.100:554/cam/realmonitor?channel=1&subtype=1' use '/cam/realmonitor?channel=1&subtype=1' only.

A more detailed procedure is explained here.

b) Without AngelBox Install microsoft on mac.

Step 1: Port forwarding needs to be configured on your router for the designated camera
Step 2: Open Camera Connector
Step 3: Paste the stream address
Step 4: Replace the local IP address with the public IP address of your network
Step 5: Replace the stream port of the camera with the port you set up during the configuration of port forwarding in Step 1

A more detailed procedure is explained here.

And that's it! 👏

Onvif Device Manager V2.2.250

Onvif Device Manager For Mac

If you have any further questions please don't hesitate to contact us at support@angelcam.com.

Onvif Device Manager For Linux

Still need further assistance? Why not check out our Angelcam Community, where you can connect with other users who are sharing their own experiences and insight into various Angelcam topics and problems.